Independent contractors, licensed in TX

Covering 7 ZIP codes

Chase Cover Replacement in Temple, TX

Orange streaks running down the siding below a chimney are the most common chimney complaint in Texas, and the cause is the flat metal lid on top of the chase.

  • Covering 7 Temple ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about a chase cover in Temple

(844) 785-4066

No charge to you, and you are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chase Cover Replacement in Temple, Texas

What to ask for on Chase Cover Replacement in Temple

  • Stainless covers made to measure
  • Cross-break so water drains
  • Correct collar and storm seal
  • Wind-rated fixing
Call about a chase cover
  • Licensed & insured Every company we put you through to holds current licensing and insurance.
  • Know what to ask You are told what actually decides the price, so you can judge a quote.
  • Free to use There is no charge to you. Compare quotes and walk away at any point.
  • Calls answered 7 days Someone picks up seven days a week, weekends included.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and no charge to you — the contractor pays us, which is how it stays free at your end.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Temple. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and no charge to you either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Stainless chase cover replacing galvanized in Temple, TX
Stainless chase cover replacing galvanized A cross-break sheds water to the edges instead of ponding in the middle and rusting through.
Movement cracking assessed before repointing in Temple, TX
Movement cracking assessed before repointing A stepped diagonal crack is the soil moving the chimney. Repointing it without that is temporary by definition.
Gas log set serviced and reset in Temple, TX
Gas log set serviced and reset Burner ports cleared, pilot assembly cleaned, gas pressure checked, logs returned to the specified layout.

Chase Cover Replacement in Temple

Chimneys in Temple fail from the top down and from the inside out, which is why problems are usually well advanced before anyone notices. The crown cracks, water gets into the structure, and the first visible sign arrives on a ceiling long afterwards.

79% of homes in Temple heat with electricity, so a fireplace here is used by choice rather than by necessity and tends to be inspected far less often. (US Census ACS 2022)

Wind and what is underneath

Texas storms put direct uplift on anything standing proud of a roof. A cover that is merely resting becomes a cover that is gone, and an open chase takes rain for months before anyone notices.

Check the chase interior first

Water in a framed chase wets framing and insulation with nowhere to dry. Putting a new lid over rotted framing solves half the problem.

On the Gulf coast

Salt plus permanent humidity takes galvanized apart far faster than inland. From Galveston through Beaumont, stainless is the only specification worth fitting.

Most Texas chimneys are not masonry

On the enormous volume of housing built across DFW, Houston and the Austin ring since about 1980, the chimney is a framed chase clad to match the house with a sheet-metal lid on top and a factory-built firebox inside. It is not a masonry stack and it does not behave like one.

Builders fit a flat galvanized cover because it is the cheapest part available. Flat means water stands in the middle instead of running off, and standing water corrodes galvanized steel from the top down. Once it perforates, water runs into the chase — onto framing, onto insulation — while the only visible sign is rust staining down the outside.

Stainless with a cross-break

A shallow ridge pressed into the sheet forces water to the edges, and stainless does not rust through. Together that removes both failure modes, and it is the last cover the chimney needs.

The collar is where many still leak

The cover has to seal where the flue pipe passes through it. A proper collar with a storm seal does that; a bead of silicone does not, and it is where a lot of otherwise decent covers fail.

The full guide: everything about chase cover replacement — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Temple.

Areas we cover in Temple

We work throughout Temple, including the areas around Baylor Scott & White Medical Center, Belton Lake Outdoor Recreation Area, Chalk Ridge Falls and Coryell Creek.

Chase Cover Replacement in Temple — FAQs

Do you charge for a quote in Temple?

There is no charge to you at any point. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.

How often should a chimney be inspected?

Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.

Do we need a chimney liner?

If a camera survey finds cracked tile, washed-out joints or a separated liner, yes. You also need one whenever the flue is the wrong size for the appliance now venting into it, which is the common case after any change of fuel or appliance. A liner is sized from the appliance manufacturer venting tables, not from what happens to fit down the chimney.

What does a Level 2 inspection include?

Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.

Is chimney waterproofing worth doing?

On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.

What qualifications should a Temple chimney company have?

Ask for three things and check them: current liability insurance, CSIA certification from the Chimney Safety Institute of America, and whatever license or registration your state requires for the work in question. Ask to see the documents rather than taking the logo on the van as proof. For anything involving gas appliance venting, ask separately who is pulling the permit.

Does the cap go on the cover?

Separate parts. The cover closes the chase; the cap sits over the flue opening with mesh. Both are usually done in one visit.

How long should stainless last?

Decades, including on the Gulf coast.

Neighborhoods we cover in Temple

Chimney work across Temple and the areas around it.

  • Baylor Scott & White Medical Center
  • Belton Lake Outdoor Recreation Area
  • Chalk Ridge Falls
  • Coryell Creek
  • Country Club Heights
  • Crossroads Park
  • Downtown
  • Friars Creek Trail
  • Lions Junction Family Water Park
  • Lions Junction Park
  • Lions Park
  • Miller Park
  • Miller Springs Nature Center
  • Northwest Hills
  • Pepper Creek Trail
  • Ralph Wilson Youth Club
  • Sammons Golf Course
  • Summer Fun Water Park
Call now How it works